EFCcv Euro Pedal


Electron Fuzz Custom CV Euro pedal version

IN STOCK!.
EFCcvEuro1Price: $349

Domestic shipping: $free
International Priority Shipping: $39

**International shipping charges are estimated. We will invoice you for the shipping once we can determine the exact cost to your country. Feel free to message us with any questions.

Scroll down for demo video!




EFCcvEuro2The more compact version of the large format EFCcv

•••Euro Rack Pedal only! Sorry guitar people this pedal only has  1/8th inch jacks. All jacks are on the top side/face of the pedal. It is intended to connect to your euro rack system.

4 CV inputs work on a positive +5 voltage. Safe to run higher voltages in but you wont notice much change past 5volts.

CV Control:

Hurt“, “Pain“, “Feedback OSC“, and “Distortion Out” all have independent CV controls.

Hurt” works as a Hi-Pass. “Pain” works as a low pass. Both of these tone controls are tied to gain stages. Changing these also affect the amount of gain passing to the next gain stage. This produces a more chaotic form of tone control and a wide range of textures. “Feedback EFCcvEuro5OSC” is a noise making function that can produce sounds ranging from low pulses or bit crunch to tunable wha-screaming self oscillation. The tone of the Feedback OSC is greatly dependent on Hurt and Pain controls. “Distortion Out” is the volume of the distortion pedal. It works like a basic VCA. The Distortion Out is independent from the “Bleed Out” that functions as a clean pass circuit. Ideal for mixing distortion with synths or anything from vocals to drum sounds.

The new input impedance knob: reduces the amount of signal hitting the distortion circuit.
Concept: The clean signal pass provides a way to keep the fidelity of the original signal intact while mixing the distorted signal over it.

Function: ***This is a high gain distortion pedal. Please expect it to behave as such. In short it will amplify line noise. Moog products tend to be very clean. Dave Smith synths such as the Pro2 tend to have a higher noise floors. While no signal is being run through it the noise floor will be amplified. If a square wave CV signal is left on you may hear “CV tick” as the transistors switch from open to closed.

More about the Electron Fuzz Custom:

The Electron Fuzz “Custom” is an extremely high gain distortion. Seriously, normal volume setting is at about 10% of its full output potential. Two gain/tone controls “Hurt” and “Pain” give a variety of tone textures and a feedback noise loop can be adjusted to add a very gritty almost 8-bit sound or a squelching scream. (Great for droning or well crafted solos and recording). The extra stomp switch adds 2 more additional gain stages and a boost of high end to the sound. Best of all the distortion oscillates when notes are held adding a new level of expression.

***Orders may take 1-2 days depending on availability.

Here is a great demo video of the non-cv EFC from the “Pedal and Effects” youtube channel featuring Alessandro Cortini of NIN, Sonoio and Modwheelmood.

Please read the brief history of the Electron Fuzz here.

    Things I personally enjoy about this pedal:

    • Modulate that crazy feedback OSC
    • Fuzzy to crunchy tones
    • Wide range of possible textures and character
    • Expressive distortion oscillations
    • Feedback noise loop for unusual sound design
    • Extremely high gain for recording direct to your DAW
    • Use with guitars and keyboards
    • VU meter responds to your playing

The red LED switches on when boost mode is enabled. A convent way to know where you are when playing.

• Knob controls:

A unique approach to tone control…

Hurt: Controls the gain of 3rd gain stage. Lowering the gain will also reduce low end.
Pain: Controls the gain of the 2nd transistor gain stage. Lowering the gain will reduce high end.
Output: Volume/saturation. Take some of the edge off the mix or crank the pain and hurt all the way for a big, dirty, crunchy fuzz.
FB Noise: Adjusts the amount of feedback in the circuit for noise making. Creates a weird octave mod fx.

• Switch controls:
Low cut toggle: Cuts the low end for a slightly less bassy more gated sound.
x1000 gain: On left stomp switch. This takes your sound through an addition 2 transistor gain stages and pushes the electrons way past 11! The booster switch adds a loud and dirty, thrash crunch to this versatile pedal. Incredible for feedback noise and FX textures. Can cause the parasitic frequency oscillation but sounds awesome while playing.
True Bypass: Lets you play through the pedal.

• Meter: Responds to your playing, and reflects first gain stage transistor distortion. Illuminates when active.

***All purchases done through Paypal. Units are always shipped ASAP. Please note when purchasing from eBay shipping charges may be vary.

****International shipping can vary. Typically I will credit back any difference when your unit is ready and I am able to verify exact shipping to your specific location.

FacebookMore...

johnathan February 2, 2017 Available, For Sale